1 3

ISTABREEZE® WIND TURBINE

Kit L-500W 12V/24V Wind Turbine Wind Generator & Hybrid Charge Controller & Tower

Kit L-500W 12V/24V Wind Turbine Wind Generator & Hybrid Charge Controller & Tower

$600.00
$600.00
Sale Sold out
Shipping calculated at checkout.
Voltage (Optionally Tower Set)
You can see technical drawing of Mast Set here -->
 
You can see performance chart of wind turbine here -->
 
You can see mast shaft connecting flange technical drawing here -->
 
You can see manual book of wind turbine here --> 
 
You can see manual book of charge controller here -->

 

 

Robust Wind Generator Original IstaBreeze® L-500


Manufactured from fiberglass reinforced plastic, the blades and housing are durable, stable and unusually lightweight.

The maintenance-free sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast.

Installation in the mast tube by plug connection. Required mast tube inside diameter: 37 mm nominal dimension!

Can also be used in combination with photovoltaic solar cells with our hybrid charge controllers.
 
 

This IstaBreeze® 650 Wind / Solar Hybrid Charge Controller is for parallel use

from 3-phase generators (AC) to max. 500 watts

and 2-phase photovoltaic modules (DC) up to max. 150 watts suitable.

 

  • Available in two versions: 12 Volt or 24 Volt
  • Microchip controlled
  • Aluminum casing
  • LEDs for display: charging / battery connected / battery full
  • Control the charging process to protect the battery from overcharging
  • Braking the wind generator at too high wind speeds

 

This makes it possible to use wind generator power and solar module power for charging batteries.

 

Tower Specifications:

4 meters IstaBreeze TOWER for wind generator i 500, L-500, IstaBreeze or wind generators up to 15 KG It has never been so easy to install a wind generator.
 
With the IstaBreeze Tower it is possible to build a wind generator in a few minutes.
 
The folding system simplifies the whole process. During maintenance, only a few screws are released and the tower can be folded for maintenance. Dowels and screws for the floor (concrete floor) is still needed !!
 

Thanks to the specially designed galvanized stainless steel tensioned pole, the installation of wind turbines is now very easy. Thanks to its hinged system, one person can easily install it and easily remove the turbine whenever they want.

The pole set consists of four one-meter pipes, a hinged lower phalanx, three steel ropes and nine tensioning devices.

It can also be extended up to a maximum of 10 meters by adding one-meter additional pipes upon request.

 

PRODUCT FEATURES - WIND TURBINE:

 

  • Current : 40A (12V) - 20A (24V)
  • Generator Body: Composite
  • Body Material: Composite
  • Maximum Power: 500W
  • Rated Power: 420W
  • Voltage: 12V-AC / 24V-AC
  • Package Dimensions: 70 x 30 x 20 cm (6.5Kg)

 

 WIND SPEED:

  • Initial Wind Speed: 3 m/s
  • Maximum Wind Speed: 15-16 m/s

 

BLADE SPECIFICATIONS:

 

  • Blade Material:Composite
  • Blade Length:60 cm
  • Rotor Diameter:122 cm
  • Noise: 40 dB
  • Weight: 270 Gr
  • Width: 12,5 cm

 

CHARGE CONTROLLER MODEL 650 HYBRID: 12V

 

  • Nominal output power: 650W
  • Input voltage range: 12 ~ 16V
  • Battery: 12V
  • Max. Input wind power: 500W
  • Max. Input solar PV: 150W
  • Overcharge protection: 14,9V ± 0.5V AH
  • Recommended battery: Min. 1800W - Max. 2400W
  • Wind turbine Max. Input current: 40 A
  • Protection function: When the battery is sufficiently charged, automatic braking is activated. However, manual braking is required in stormy weather.
  • Weight: 0,6 kg

 

 

CHARGE CONTROLLER MODEL 650 HYBRID: 24V

 

  • Nominal output power: 650W
  • Input voltage range: 24 ~ 28V
  • Battery: 24v
  • Max. Input wind power: 500W
  • Max. Input solar PV: 150W
  • Overcharge protection: 29V ± 0.5V AH
  • Recommended battery: Min. 1800W - Max. 2400W
  • Wind turbine Max. Input current: 20 A
  • Protection function: When the battery is sufficiently charged, automatic braking is activated. However, manual braking is required in stormy weather.
  • Size: 140 x 120 x60 mm
  • Weight: 0,6 kg

 

TOWER SET: 

 

  • Fasteners : 3 Rope Tensioner and Bolt Set
  • Steel Rope: 3 X 5m
  • Mast: 4 Galvanized Poles
  • Outer Diameter:42 mm
  • Inner Diameter: 37 mm
  • Plate: 1 piece Galvanized hinged plate
  • Length: 4 m
  • Mast Wall Thickness: 3 mm

 

 NECESSARY EQUIPMENTS:

 

  • Battery: Suitable battery group: Min 1800W - Max 2400W

  

 PACKAGE CONTENT:

 

  • Connection Screws: 1 Set
  • Nose: 1 Pcs
  • Flange: 1 Pcs
  • Body: 1 Pcs
  • Blades: 3 Pcs
  • Manual Book: 1 Pcs
  • Charge Controller : 1 Pcs
  • Tower : Optionally 

 

View full details